Ch 1 · Solutions Start
Chemistry · Ch 1 · 12 topics · 68 slides

Solutions

NCERT Class 12 Chemistry · Chapter 1
Easy notes · Formulas · Solved numericals · Questions to memorise

Swipe left or right to change slide

1 Start
i
Topic 1 of 12

How to use

Board weightage: about 7 marks. How to use this booklet: Day 1: Parts A–B (concentration terms, Henry's law). Learn…

2 slides1 min

Swipe ← to begin

How to use

Board weightage: about 7 marks.

How to use this booklet:

  • Day 1: Parts A–B (concentration terms, Henry's law). Learn the formula table by heart.

  • Day 2: Parts C–D (Raoult's law, ideal / non-ideal, azeotropes).

  • Day 3: Parts E–F (colligative properties, van't Hoff factor). Solve every numerical once on paper.

How to use
ColourMeaning
Yellow highlightMust remember – examiners look for these words
Blue cardA reaction: general reaction → reagents above arrow → example with names
Orange boxValues / data to remember
Purple boxA difficult word explained simply
Brown boxSolved numerical / mechanism, step by step
Green boxHinglish mein samjho
Red boxExam tip
2 Words
Aa
Topic 2 of 12 · Start Here

Difficult Words Made Easy

1 slide1 min

Swipe ← to begin

Start Here · Difficult Words Made Easy
WordSimple meaningExample
SolutionA homogeneous mixture of two or more substances (same everywhere).
Hinglish: Solution = ek jaisa mixture, kahin bhi sample lo, same.
sugar in water
Solute / solventSolute = the smaller part that dissolves; solvent = the larger part that dissolves it.
Hinglish: Kam wala solute, zyada wala solvent.
salt / water
Molality (m)Moles of solute in 1 kg of solvent.
Hinglish: Molality mein kg solvent – temperature se nahi badalta.
1 m = 1 mol per kg
Molarity (M)Moles of solute in 1 L of solution.
Hinglish: Molarity mein litre solution – temperature se badalta hai.
1 M NaOH
Mole fraction (x)Moles of one part ÷ total moles. All mole fractions add to 1.
Hinglish: Hissa nikaalo – total moles mein kitna is component ka.
xA + xB = 1
Vapour pressurePressure of the vapour above a liquid, when evaporation and condensation are balanced.
Hinglish: Liquid ke upar bhaap ka pressure, jab aana-jaana barabar.
water: 23.8 mm Hg at 298 K
Colligative propertyA property that depends only on the number of solute particles, not on what they are.
Hinglish: Sirf particles ki ginti matter karti hai, unki pehchaan nahi.
ΔTf, π
OsmosisFlow of solvent through a semipermeable membrane from dilute to concentrated solution.
Hinglish: Paani patle se gaadhe ki taraf jaata hai membrane se.
raisins swell in water
AzeotropeA liquid mixture that boils at a constant temperature with the same composition in liquid and vapour.
Hinglish: Aisa mixture jo distillation se alag nahi hota.
95% ethanol
van't Hoff factor (i)How many particles one formula unit gives in solution (or the correction factor).
Hinglish: Ek molecule kitne tukde banata hai – wahi i.
NaCl: i = 2
3 Values
π
Topic 3 of 12 · Values to Remember

Data and Tests

ATOMIC MASSES AND ELECTRONEGATIVITY CONSTANTS FOR SOLUTIONS VAN'T HOFF FACTOR i (complete dissociation) i > 1 → dis…

4 slides2 min

Swipe ← to begin

Values to Remember · Data and Tests

ATOMIC MASSES AND ELECTRONEGATIVITY

ElementSymbolAtomic mass (u)Electronegativity
HydrogenH12.1
CarbonC122.5
NitrogenN143.0
OxygenO163.5
FluorineF194.0
SodiumNa230.9
MagnesiumMg241.2
SulphurS322.5
ChlorineCl35.53.0
PotassiumK390.8
BromineBr802.8
SilverAg1081.9
IodineI1272.5
Values to Remember · Data and Tests

CONSTANTS FOR SOLUTIONS

QuantityValue
Gas constant R8.314 J K−1 mol−1 = 0.0821 L atm K−1 mol−1 = 0.083 L bar K−1 mol−1
Kb of water (ebullioscopic)0.52 K kg mol−1
Kf of water (cryoscopic)1.86 K kg mol−1
Kb / Kf of benzene2.53 / 5.12 K kg mol−1
Normal b.p. / f.p. of water373.15 K / 273.15 K
1 atm1.013 bar = 760 mm Hg = 101.3 kPa
Values to Remember · Data and Tests

VAN'T HOFF FACTOR i (complete dissociation)

Solutei
Glucose, urea, sucrose (non-electrolyte)1
NaCl, KCl, MgSO42
CaCl2, K2SO4, Na2SO43
K3[Fe(CN)6], AlCl34
Acetic acid in benzene (dimer)≈ 1/2

i > 1 → dissociation; i < 1 → association.

Values to Remember · Data and Tests

HANDY FACTS

  • Molality (m) does not change with temperature; molarity (M) does (volume changes).

  • 1 mol of solute in 1 kg water: ΔTb = 0.52 K, ΔTf = 1.86 K.

  • Isotonic solutions have the same osmotic pressure; 0.9% NaCl is isotonic with blood (normal saline).

Hinglish mein samjho: R, Kb aur Kf ki value yaad rakho – har numerical mein lagti hai. i: NaCl 2, CaCl2 3, glucose 1.
4 Concept
Topic 4 of 12 · Part A

Types of Solutions and Concentration

Solute and solvent can be solid, liquid or gas – 9 types of solutions. Gas in gas: air (O2 in N2). Liquid in gas: c…

7 slides4 min1 quick check

Swipe ← to begin

Part A · Types of Solutions and Concentration

1. Types of solutions

  • Solute and solvent can be solid, liquid or gas – 9 types of solutions.
  • Gas in gas: air (O2 in N2). Liquid in gas: chloroform mixed with N2. Solid in gas: camphor in N2.
  • Gas in liquid: O2 in water. Liquid in liquid: ethanol in water. Solid in liquid: glucose in water.
  • Gas in solid: H2 in palladium. Liquid in solid: amalgam of Hg with Na. Solid in solid: copper in gold (alloy).
Hinglish mein samjho: Solvent ki state = solution ki state. Hawa gas solution hai, alloy solid solution.
Part A · Types of Solutions and Concentration

2. Concentration terms – learn the formulas

QuantityFormulaUnit
Mass percentage
%
Volume percentage
%
Parts per million
ppm
Mole fraction
no unit
Molarity
mol L−1
Molality
mol kg−1
Part A · Types of Solutions and Concentration

Difficult word → Why molality is better than molarity

Volume changes with temperature (liquids expand), so molarity changes with temperature. Mass does not change, so molality, mole fraction and mass % are temperature-independent.

Hinglish mein samjho: Garam karo to volume badhta hai, molarity badal jaati hai. Mass nahi badalta – molality same.
Part A · Types of Solutions and Concentration

SOLVED NUMERICAL – Molarity of NaOH

Step 1: 5 g NaOH is dissolved in 450 mL solution. Moles of NaOH (M = 40 g mol−1):

Step 2: Volume in litres = 0.450 L. Molarity = moles ÷ litres:

Answer: 0.278 M

Part A · Types of Solutions and Concentration

SOLVED NUMERICAL – Molality of ethanoic acid in benzene

Step 1: 2.5 g CH3COOH (M = 60) in 75 g benzene. Moles of solute:

Step 2: Mass of solvent = 75 g = 0.075 kg:

Why: molality uses kg of SOLVENT, not solution

Answer: 0.556 mol kg−1

Part A · Types of Solutions and Concentration

SOLVED NUMERICAL – Mole fraction of ethylene glycol (20% by mass)

Step 1: Take 100 g solution: 20 g glycol C2H6O2 (M = 62) and 80 g water (M = 18).

Step 2: Mole fractions:

Answer: x(glycol) = 0.068, x(water) = 0.932

Part A · Types of Solutions and Concentration

Quick check

Which concentration term does NOT change with temperature?

Practice only – this does not count as a test.

5 Concept
Topic 5 of 12 · Part B

Solubility and Henry's Law

Like dissolves like: polar solutes dissolve in polar solvents (salt in water); non-polar in non-polar (naphthalene …

7 slides4 min2 quick checks

Swipe ← to begin

Part B · Solubility and Henry's Law

1. Solubility of a solid in a liquid

  • Like dissolves like: polar solutes dissolve in polar solvents (salt in water); non-polar in non-polar (naphthalene in benzene).
  • When no more solute dissolves, the solution is saturated (dynamic equilibrium between dissolving and crystallising).
  • Effect of temperature: if dissolving is endothermic (ΔH > 0), solubility increases with temperature; if exothermic, it decreases (Le Chatelier).
  • Pressure has almost no effect on solubility of solids in liquids (they are incompressible).
Hinglish mein samjho: Jaisa solvent, waisa solute ghulta hai. Temperature ka asar ΔH se decide hota hai.
Part B · Solubility and Henry's Law

2. Gas in a liquid – Henry's law

Henry's law: at constant temperature, the partial pressure of a gas above a liquid is proportional to its mole fraction in the solution.

Part B · Solubility and Henry's Law
  • KH = Henry's law constant (unit: bar or kbar). Higher KH → lower solubility of the gas.
  • KH increases with temperature → gases are less soluble in hot water (fish need cold water).
  • Solubility of a gas increases with pressure.
Hinglish mein samjho: p = KH x. Pressure badhao, gas zyada ghulegi. KH bada matlab gas kam ghulti hai. Garam paani mein gas kam ghulti hai.
Part B · Solubility and Henry's Law
Application of Henry's lawWhy
Soda bottles are sealed at high pressureto dissolve more CO2; fizz comes out when opened
Bends in scuba divershigh pressure underwater dissolves more N2 in blood; on rising fast, N2 forms bubbles in blood
Divers' tanks contain air diluted with helium (11.7% He, 56.2% N2, 32.1% O2)He is less soluble in blood
Anoxia at high altitudelow partial pressure of O2 → less O2 in blood → weakness, unclear thinking
Part B · Solubility and Henry's Law

SOLVED NUMERICAL – Henry's law – N2 dissolved in water

Step 1: KH for N2 at 293 K = 76.48 kbar; partial pressure of N2 = 0.987 bar. Mole fraction of N2:

Step 2: 1 L water = 1000/18 = 55.5 mol. Since x is tiny, n(N2) ≈ x × n(water):

Answer: 0.716 mmol N2 per litre of water

Part B · Solubility and Henry's Law

Quick check

Higher the value of KH of a gas, its solubility in a liquid is:

Practice only – this does not count as a test.

Part B · Solubility and Henry's Law

Quick check

Assertion: Fish find it difficult to live in warm water.
Reason: KH of O2 decreases with rise in temperature.

Practice only – this does not count as a test.

6 Concept
Topic 6 of 12 · Part C

Vapour Pressure and Raoult's Law

Raoult's law: the partial vapour pressure of each volatile component is proportional to its mole fraction in the so…

6 slides4 min1 quick check

Swipe ← to begin

Part C · Vapour Pressure and Raoult's Law

1. Two volatile liquids (A + B)

  • Raoult's law: the partial vapour pressure of each volatile component is proportional to its mole fraction in the solution.
  • Total vapour pressure p = pA + pB changes in a straight line with the mole fraction (see the formula table).
  • Mole fraction in the vapour: yA = pA / ptotal. The vapour is richer in the more volatile component.
Hinglish mein samjho: Har liquid apne hisse ke hisaab se bhaap deta hai. Total = dono ka jod.
Part C · Vapour Pressure and Raoult's Law
QuantityFormulaUnit
Raoult's law (each component)
bar / mm Hg
Total vapour pressure
bar / mm Hg
Mole fraction in vapour
–
Part C · Vapour Pressure and Raoult's Law

SOLVED NUMERICAL – Vapour pressure of a CHCl3 + CH2Cl2 mixture (298 K)

Step 1: 25.5 g CHCl3 (M = 119.5) and 40 g CH2Cl2 (M = 85). p° = 200 and 415 mm Hg.

Step 2: Mole fractions in the liquid:

Step 3: Total pressure:

Step 4: Mole fraction in vapour:

Why: vapour is richer in the more volatile CH2Cl2

Answer: p = 347.9 mm Hg; vapour: 0.82 CH2Cl2, 0.18 CHCl3

Part C · Vapour Pressure and Raoult's Law

2. Raoult's law is a special case of Henry's law

  • Henry: p = KH x. Raoult: p = p° x. Both say p ∝ x – only the constant differs (KH = p° in Raoult's case).
Hinglish mein samjho: Dono mein p ∝ x. Raoult mein constant p° hai, Henry mein KH.
Part C · Vapour Pressure and Raoult's Law

3. Solution with a non-volatile solute

  • Solute particles occupy part of the surface → fewer solvent molecules escape → vapour pressure decreases.
  • Only the solvent makes vapour: p = x(solvent) × p°(solvent).
Hinglish mein samjho: Surface par solute baith jaata hai, solvent kam udta hai – vapour pressure kam.
Part C · Vapour Pressure and Raoult's Law

Quick check

Relative lowering of vapour pressure equals:

Practice only – this does not count as a test.

7 Concept
◆
Topic 7 of 12 · Part D

Ideal and Non-ideal Solutions

Hinglish mein samjho: Positive: A–B dosti kamzor → molecules aasaani se udte hain → zyada vapour pressure, min-boil…

4 slides2 min2 quick checks

Swipe ← to begin

Part D · Ideal and Non-ideal Solutions
PointIdealPositive deviationNegative deviation
Raoult's lawObeyed at all compositionsp higher than expectedp lower than expected
A–B attractionSame as A–A, B–BWeaker than A–A, B–BStronger than A–A, B–B
ΔHmix0> 0 (endothermic)< 0 (exothermic)
ΔVmix0> 0 (expands)< 0 (contracts)
Examplesn-hexane + n-heptane; benzene + tolueneethanol + acetone; ethanol + water; CS2 + acetonechloroform + acetone (H-bond forms); HNO3 + water; phenol + aniline
Azeotrope–Minimum boiling (95% ethanol, 351.3 K)Maximum boiling (68% HNO3, 393.5 K)
Hinglish mein samjho: Positive: A–B dosti kamzor → molecules aasaani se udte hain → zyada vapour pressure, min-boiling azeotrope. Negative: A–B dosti mazboot → kam udte hain → kam vapour pressure, max-boiling azeotrope.
Part D · Ideal and Non-ideal Solutions

Exam tip: Chloroform + acetone shows negative deviation because a new H-bond forms between CHCl3's H and acetone's O – very common 2-mark question.

Part D · Ideal and Non-ideal Solutions

Quick check

A mixture of chloroform and acetone shows:

Practice only – this does not count as a test.

Part D · Ideal and Non-ideal Solutions

Quick check

95% ethanol + water is an example of:

Practice only – this does not count as a test.

8 Concept
Topic 8 of 12 · Part E

Colligative Properties

Four properties depend only on the number of solute particles: (1) relative lowering of vapour pressure, (2) elevat…

9 slides5 min1 quick check

Swipe ← to begin

Part E · Colligative Properties

Four properties depend only on the number of solute particles: (1) relative lowering of vapour pressure, (2) elevation of boiling point, (3) depression of freezing point, (4) osmotic pressure.

Part E · Colligative Properties
QuantityFormulaUnit
Relative lowering of v.p.
–
Elevation of boiling point
K
Depression of freezing point
K
Molar mass from ΔT
g mol−1
Osmotic pressure
bar / atm
Molar mass from π
g mol−1
Part E · Colligative Properties

Difficult word → Why does a solute raise the boiling point and lower the freezing point?

The solute lowers the vapour pressure. To boil, the vapour pressure must reach 1 atm – so the solution must be heated to a higher temperature. At the freezing point, solid and liquid must have the same vapour pressure – the solution's lower vapour pressure meets the solid's curve at a lower temperature.

Hinglish mein samjho: Vapour pressure kam hua → ubalne ke liye zyada garam karna padega, jamne ke liye zyada thanda.
Part E · Colligative Properties

SOLVED NUMERICAL – Molar mass from relative lowering of vapour pressure

Step 1: Pure benzene p° = 0.850 bar; 0.5 g solute in 39 g benzene (M = 78) gives p = 0.845 bar.

Step 2: Use the formula and solve for M2:

Answer: M2 = 170 g mol−1

Part E · Colligative Properties

SOLVED NUMERICAL – Boiling point of glucose solution

Step 1: 18 g glucose (M = 180) in 1 kg water → molality:

Step 2: ΔTb = Kb × m:

Step 3: New boiling point:

Answer: 373.202 K

Part E · Colligative Properties

SOLVED NUMERICAL – Freezing point of an antifreeze solution

Step 1: 45 g ethylene glycol (M = 62) in 600 g water:

Step 2: ΔTf = Kf × m:

Step 3: Freezing point:

Answer: 270.9 K

Part E · Colligative Properties

Osmosis and osmotic pressure

  • Semipermeable membrane (SPM): lets solvent pass but not solute (e.g. animal bladder, cellophane, parchment).
  • Osmotic pressure (π): the extra pressure that must be applied on the solution side to stop osmosis.
  • π is the best method for molar masses of proteins / polymers – measured at room temperature and gives large values even for dilute solutions.
  • Isotonic: same π (0.9% NaCl = normal saline with blood). Hypertonic (more concentrated) → cells shrink; hypotonic → cells swell and burst.
  • Reverse osmosis: apply pressure greater than π → pure water is pushed out of the solution. Used in desalination of sea water (cellulose acetate membrane).
Hinglish mein samjho: Osmosis mein paani patle se gaadhe ki taraf. Ulta dabaav π se zyada lagao to paani bahar – yahi RO water purifier.
Part E · Colligative Properties

SOLVED NUMERICAL – Molar mass of a protein from osmotic pressure

Step 1: 1.26 g protein in 200 cm3 solution has π = 2.57 × 10−3 bar at 300 K. V = 0.200 L, R = 0.083 L bar K−1 mol−1.

Step 2: Use M2 = w2RT / (πV):

Answer: ≈ 61 022 g mol−1

Part E · Colligative Properties

Quick check

Colligative properties depend on:

Practice only – this does not count as a test.

9 Concept
Topic 9 of 12 · Part F

Abnormal Molar Mass and van't Hoff Factor

If the solute dissociates (NaCl → Na+ + Cl−), there are more particles → bigger colligative effect → lower calculat…

5 slides3 min2 quick checks

Swipe ← to begin

Part F · Abnormal Molar Mass and van't Hoff Factor
  • If the solute dissociates (NaCl → Na+ + Cl−), there are more particles → bigger colligative effect → lower calculated molar mass.
  • If the solute associates (2CH3COOH → dimer in benzene), fewer particles → smaller effect → higher molar mass.
  • van't Hoff factor i = normal molar mass ÷ abnormal molar mass = observed colligative property ÷ calculated.
Part F · Abnormal Molar Mass and van't Hoff Factor
QuantityFormulaUnit
van't Hoff factor
–
Modified equations
–
Degree of dissociation
–
Degree of association
–
Part F · Abnormal Molar Mass and van't Hoff Factor

SOLVED NUMERICAL – Association of benzoic acid in benzene

Step 1: 2 g benzoic acid (M = 122) in 25 g benzene lowers the freezing point by 1.62 K; Kf = 4.9 K kg mol−1.

Step 2: van't Hoff factor:

Step 3: Dimerisation (n = 2): i = 1 − α/2

Why: i < 1 means association

Answer: 99.2% of benzoic acid is associated (dimer)

Hinglish mein samjho: i > 1: molecule toota (dissociation), molar mass kam aata hai. i < 1: molecule jude (association), molar mass zyada aata hai.
Part F · Abnormal Molar Mass and van't Hoff Factor

Quick check

van't Hoff factor of K2SO4 (complete dissociation) is:

Practice only – this does not count as a test.

Part F · Abnormal Molar Mass and van't Hoff Factor

Quick check

Assertion: 0.1 M NaCl has a lower freezing point than 0.1 M glucose.
Reason: NaCl gives two ions in solution.

Practice only – this does not count as a test.

10 Give reasons
?
Topic 10 of 12 · Part G

"Give Reasons" – Board Favourites

3 slides2 min

Swipe ← to begin

Part G · "Give Reasons" – Board Favourites

Q1. Give reason: Molality is preferred over molarity. [2]

Show answer

Ans. Molality depends on mass, which does not change with temperature; molarity depends on volume, which changes.

Q2. Give reason: Aquatic species are more comfortable in cold water than in warm water. [2]

Show answer

Ans. KH of O2 increases with temperature → less O2 dissolves in warm water.

Q3. Give reason: Scuba divers' tanks contain helium. [2]

Show answer

Ans. He is much less soluble in blood than N2 – avoids bends.

Part G · "Give Reasons" – Board Favourites

Q4. Give reason: A mixture of chloroform and acetone shows negative deviation. [2]

Show answer

Ans. New H-bonds form between them (stronger A–B attraction) → lower vapour pressure, ΔHmix < 0.

Q5. Give reason: Osmotic pressure is preferred for determining molar masses of proteins. [2]

Show answer

Ans. Measured at room temperature (proteins don't decompose) and π is large even for very dilute solutions.

Part G · "Give Reasons" – Board Favourites

Q6. Give reason: NaCl is spread on icy roads. [2]

Show answer

Ans. It depresses the freezing point of water, so ice melts at a lower temperature.

Q7. Give reason: 0.1 M NaCl has a lower freezing point than 0.1 M glucose. [2]

Show answer

Ans. NaCl gives 2 ions (i = 2), glucose i = 1 → double ΔTf.

Q8. Give reason: Raw mango shrivels in brine but raisins swell in water. [2]

Show answer

Ans. Brine is hypertonic → water leaves mango (exosmosis); water is hypotonic for raisins → water enters (endosmosis).

11 Questions
Q
Topic 11 of 12 · Part H

Question Bank to Memorise

A: both true, R explains A. B: both true, R doesn't explain A. C: A true, R false. D: A false, R true.

7 slides4 min

Swipe ← to begin

Part H · Question Bank to Memorise

1-mark questions

Q1. State Henry's law. [1]

Show answer

Ans. At constant temperature, partial pressure of a gas = KH × its mole fraction in solution (p = KH x).

Q2. Which concentration term is independent of temperature? [1]

Show answer

Ans. Molality (also mole fraction and mass %).

Q3. Give an example of a maximum-boiling azeotrope. [1]

Show answer

Ans. 68% HNO3 + 32% water (boils at 393.5 K).

Q4. What is the van't Hoff factor of K2SO4 (complete dissociation)? [1]

Show answer

Ans. 3 (2K+ + SO42−).

Part H · Question Bank to Memorise

Q5. Define isotonic solutions. [1]

Show answer

Ans. Solutions having the same osmotic pressure at the same temperature.

Q6. What happens when a pressure greater than osmotic pressure is applied on the solution? [1]

Show answer

Ans. Reverse osmosis – pure solvent flows out of the solution.

Part H · Question Bank to Memorise

Assertion–Reason

A: both true, R explains A. B: both true, R doesn't explain A. C: A true, R false. D: A false, R true.

Part H · Question Bank to Memorise

QAR1. A: 0.1 M KCl has a higher boiling point than 0.1 M glucose. R: KCl dissociates into two ions. [1]

Show answer

Ans. A

QAR2. A: Azeotropes can be separated by fractional distillation. R: Azeotropes boil at constant temperature. [1]

Show answer

Ans. D (azeotropes CANNOT be separated)

QAR3. A: Gases are more soluble in cold water. R: KH increases with temperature. [1]

Show answer

Ans. A

Part H · Question Bank to Memorise

3-mark and 5-mark questions

QL1. Define colligative properties. Why is the molar mass found by them sometimes abnormal? (3) [3]

Show answer

Ans. Depend only on number of solute particles. Dissociation (more particles) → lower M; association (fewer particles) → higher M; corrected by van't Hoff factor i.

Part H · Question Bank to Memorise

QL2. Differentiate between ideal and non-ideal solutions with one example each of positive and negative deviation. (3) [3]

Show answer

Ans. Ideal: obeys Raoult, ΔHmix = 0, ΔVmix = 0 (benzene + toluene). Positive: ethanol + acetone. Negative: chloroform + acetone. See Part D table.

QL3. Calculate the freezing point of a solution containing 60 g glucose (M = 180) in 250 g water. Kf = 1.86 K kg mol−1. (3) [3]

Show answer

Ans. m = (60/180)/0.25 = 1.333; ΔTf = 1.86 × 1.333 = 2.48 K; Tf = 273.15 − 2.48 = 270.67 K.

Part H · Question Bank to Memorise

QL4. Calculate the osmotic pressure of 0.01 M glucose at 27 °C (R = 0.0821 L atm K−1 mol−1). (2) [3]

Show answer

Ans. π = CRT = 0.01 × 0.0821 × 300 = 0.246 atm.

12 Checklist
✓
Topic 12 of 12

Last-Minute Checklist

I can write all 6 concentration formulas and say which are temperature-independent. I can state Henry's law and giv…

1 slide1 min

Swipe ← to begin

Last-Minute Checklist
  • I can write all 6 concentration formulas and say which are temperature-independent.

  • I can state Henry's law and give 3 applications.

  • I can draw / explain positive and negative deviation with examples and azeotropes.

  • I know all 4 colligative formulas, Kb = 0.52 and Kf = 1.86 for water.

  • I can calculate i and degree of dissociation / association.

✓

Solutions: all slides done

Log in to save your progress.

Take an Easy test → All topics